The Sprayer Rax can also be turned upside down and mounted directly to a truck box for a more permanent installation.  (Attachment hardware for this type of installation is available at any hardware store.) In some cases, you may need to cut off the attachment lip which allows the Rax to be attached to our Jug Plate.  This can be done with a small grinder and cut off blade: draw a line across the aluminum attachment plate in the area which is flat and cut with the grinder, then clean up the surface on a belt sander.

(Always wear safety glasses when using a grinder or sander)

The design of the Sprayer Rax allows the user to drop in the sprayer and secure the hose in the two clips on the face of the Rax.  The wand is secured in the stacked side clips.  The stainless steel cable goes around the cap and is attached to the top hole in the center of the Rax to avoid theft.  Please set an easily remembered combination in the supplied Masterlock™.  Please refer to the photograph which shows the proper way to secure the hose.